The highlight among sliding roof windows with over 6m² of open area; a high-quality alternative to previous roof area solutions. Where previously it was necessary to use several windows in a coffered arrangement, this now offers the possibility of a frameless panorama. The sashes can be moved effortlessly by hand or electrically if preferred.
window consists of a multi-compartment basic profile with a glazing support
layer. The cavities of the basic profile are thermally separate barrier boxes.
Moreover the second layer is used for guiding the drive unit.
The moving frame (sash) is made from a multi-compartment basic profile featuring two pairs of barrier boxes in the second layer for thermal separation. The sash is moved without contact via two pairs of seal systems at the top and bottom on both sides.
is set in the first layer of the sash from the outside and is sealed all round
with a seal system inside and out and held with glass borders.
The drive unit is on the outside on the base frame. Its external position means that motor noise is directed outwards and does not penetrate inside the room. It allows installation-friendly access from the outside to the electrical motor and drive unit and their connections.
The control voltage and electrical lines (230V) are led through seal systems to any desired control and electrical source. Further control units and the required safety rail can be retrofitted without any problem.